Effiziente elektronische Rolladenmotoren für 60mm Achtkantwellen – Ihre energiesparende Lösung

The end positions of the electronic tubular motor are conveniently programmed using the button on the motor head. More comfort in everyday life, the ideal solution for retrofitting existing roller shutters or, quite simply, as a complete new installation. The powerful, tried and tested and robust electronic drives for roller shutters, awnings, screens and film screens. NOBILY Maxi - Motor 10 - 50 Nm electronic limit switch for the 60 mm octagonal tube Product highlights Maxi - roller shutter motor electronic limit switch Convenient setting of the end positions reliable and powerful easy and safe installation Thermal switch (overload protection) one of the quietest motors on the market Suitable for different shafts, adaptation possible Can be combined with conventional switches, controls, timers, relays and radio systems

The new series of electronic roller shutter motors with a large scope of performance and a plug`n`play assembly recognizes both the correct direction of rotation and the position of the end positions. The permanent torque monitoring detects obstacles in the downward travel as well as a frozen roller shutter (freeze protection). So that these functions can be guaranteed, you need tube connectors, such as the Secu-Block, which also serves as a security device. Thanks to the excellent software of the motor, it is able to automatically correct the end positions even after installation. Furthermore, up to 3 motors can be connected in parallel without the need for an additional relay. Somfy motor with electronic torque monitoring (Somfy Drive Control). Obstacle detection when closing (only with fixed shaft clip connectors) and anti-freeze protection when opening. The motor can have fixed end positions above / below or automatic end positions (fixed shaft clip connector and stopper / angled end rail required).  ATTENTION! Can only be adjusted with Somfy adjustment cable. You can use the Somfy adjustment cable to set the end positions and direction of rotation of the motor: Point to point: Point above to automatic end position below (obstacle detection) - Fixed shaft clip connector required! Automatic end position above to point below (freeze protection) - stopper / angled end rail required! Automatic top end position to Automatic bottom end position - fixed shaft clip connector and stopper required! Product highlights The Somfy drives are characterized by high quality workmanship, particularly quiet running and a long service life. The Somfy Drive Control increases the service life of the roller shutters and the mechanical components through continuous electronic torque monitoring. The end position detection for the upper and lower end positions can be saved and recognized automatically. For this, the roller shutter must have an upper stop. The end positions are constantly checked by the motor and corrected if necessary. The light stop ensures a low load on the curtain and stop through constant optimization of the stop forces. The motor's obstacle detection detects whether the roller shutter is running against an obstacle or is blocked (e.g. by freezing) and switches off automatically without being damaged. Somfy Oximo motors can be connected in parallel directly and without an additional isolating relay. The plug-in connection cable is connected to the motor via a plug connection and can be easily exchanged if necessary. The tubular motors are equipped with a durable planetary gear and are completely maintenance-free. In the event of high heat development, the integrated thermal protection switch protects the motor from overheating. After cooling down, operation is possible again. Somfy Oximo motors are VDE certified 3m cable incl.

Our clever drive offers a fully automatic plug & play mode or a manual set mode, which can be set via the end positions. If the roller shutter hits an obstacle, if it hits an obstacle the motor does this and reacts with a STOP. The obstacle is released and the roller shutter, property and personal protection is guaranteed. In addition, the motor switches itself on. If the roller shutter remains stuck in the guide rails due to frost during an up or down command, this prevents damage to the roller shutter. Tensile force of 06Nm / 12 kg Fully automatic end position detection (Plug & Play) Freeze protection, obstacle detection with shaft clip connector From 50 mm octagonal shaft 2 year guarantee Product highlights Maxi - roller shutter motor Made in Europe Freeze protection, obstacle detection with shaft clip connector Regular end position correction (every 60 cycles) Obstacle detection when closing / frost detection when opening Differentiation between obstacle and friction Thermal switch (overload protection) Endpoints are retained even after a power failure Suitable for different shafts, adaptation possible Can be combined with conventional switches, controls, timers, relays and radio systems

Electronic limit switch Your advantage: Automatic detection of the end positions when using flexible suspension springs or rigid shaft connectors Obstacle detection in AB direction when using springs or rigid shaft connectors Blockage detection in the OPEN direction (freeze protection) Anti-freeze protection at the top with automatic curtain length compensation can also be activated Automatic increase of the contact pressure with anti-lift devices Intelligent installation management enables end position corrections End position status indicator (ESI) signals missing end positions End position adjustment via conventional control element, e.g. toggle switch Simple programming of the end positions with and without fixed stops Can be switched in parallel without an isolating relay Motor head can be wrapped Soft stop at the top Dynamic torque adjustment to changes in the roller shutter element Motor protected against overheating Suitable for right-hand and left-hand installation

Electronic limit switch Your advantage: Automatic detection of the end positions when using flexible suspension springs or rigid shaft connectors Obstacle detection in AB direction when using springs or rigid shaft connectors Blockage detection in the OPEN direction (freeze protection) Anti-freeze protection at the top with automatic curtain length compensation can also be activated Automatic increase of the contact pressure with anti-lift devices Intelligent installation management enables end position corrections End position status indicator (ESI) signals missing end positions End position adjustment via conventional control element, e.g. toggle switch Simple programming of the end positions with and without fixed stops Can be switched in parallel without an isolating relay Motor head can be wrapped Soft stop at the top Dynamic torque adjustment to changes in the roller shutter element Motor protected against overheating Suitable for right-hand and left-hand installation

The electronic tubular motor for roller shutter elements from the 50 mm shaft. Our clever drive offers a fully automatic plug & play mode or a manual set mode, which can be set via the end positions. The requirement for operation in fully automatic mode is the use of fixed shaft connectors and stoppers or an angled end rail. If the roller shutter hits an obstacle when lowering, the resistance will be over the Shutters and passed to the motor thanks to the fixed shaft connector. This then responds with a STOP. The obstacle is released and the roller shutter, property and personal protection is guaranteed. In addition, the motor switches itself off if the roller shutter curtain gets stuck in the guide rails due to frost when an up or down command is given. This prevents damage to the roller shutter. Pulling power from 6 Nm - 40 Nm Including pre-assembled adapter set for the 60 mm octagonal tube Fully automatic end position detection (plug & amp; play) or manual end position setting (set mode) Regular end position correction in fully automatic mode (every 60 cycles) Freeze protection / torque cut-off with shaft clip connectors Differentiation between obstacle and friction The set endpoints are retained even after a power failure Product quality in accordance with international certifications (CD, VDE, NF)