BECKER tubular drive R20-17-E03 with adapter SW 60 and round spigot
Product number:
2020-120-1200
Product information "BECKER tubular drive R20-17-E03 with adapter SW 60 and round spigot"
- Electronic limit switch
- Your advantage: Automatic detection of the end positions when using flexible suspension springs or rigid shaft connectors
- Obstacle detection in AB direction when using springs or rigid shaft connectors
- Blockage detection in the OPEN direction (freeze protection)
- Anti-freeze protection at the top with automatic curtain length compensation can also be activated
- Automatic increase of the contact pressure with anti-lift devices
- Intelligent installation management enables end position corrections
- End position status indicator (ESI) signals missing end positions
- End position adjustment via conventional control element, e.g. toggle switch
- Simple programming of the end positions with and without fixed stops
- Can be switched in parallel without an isolating relay
- Motor head can be wrapped
- Soft stop at the top
- Dynamic torque adjustment to changes in the roller shutter element
- Motor protected against overheating
- Suitable for right-hand and left-hand installation
| Zugkraft (Nm): | 20 |
|---|---|
| Umdrehungen/min (Upm): | 17 |
| Nennpannung (V): | 230 |
| Motortyp: | Standard Elektronisch |
| Steuerungsart: | Kabelgebunden |
| Wellendurchmesser: | 60mm Achtkantwelle (SW60) |
| Zugkraft (kg): | 50 |
| Name: | R8-17E03 | R20-17-E03 |
| Motor: | tubular motor | tubular motor |
| Motor type: | Electronic drive | Electronic drive |
| Roller shutter shaft: | 60 er | 60 er |
| Tensile force in Nm: | 8 Nm | 20 Nm |
| max pulling force (kg): | 25 | 50 |
| Speed Umin: | 17 rpm | 17 rpm |
| Power consumption in watts: | 100 watts | 1160 watts |
| Current consumption A: | 0.45 A | 0.75 A |
| Nominal voltage V: | 230 V | 230 V |
| Frequency: | 50 Hz | 50 Hz |
| Protection class: | IP 44 | IP 44 |
| Thermal switch: | Yes | Yes |
| Blockage detection: | Yes | Yes |
| Pipe diameter cm: | 47 mm | 47 mm |
| Emission sound pressure level: | ||
| Cable length: | 3.0 m | 3.0 m |
| Guarantee: | & nbsp; | & nbsp; |
| Article No. : | & nbsp; | & nbsp; |
| EAN no. : | & nbsp; | & nbsp; |
Login
There aren't any asked questions yet.
Skip product gallery
Ähnliche Artikel
BECKER adjustment cable for electronic drives
4935-200-0110 / 99999
€29.90*
Product Description
Becker adjustment set for drives with electronic limit switch.
Set your electronic Becker roller shutter motors comfortably with the motor control cable. The setting set can be connected to the supply and control cable of the roller shutter motor without special tools. It simplifies the setting of the upper and lower end or switch-off points. It also enables the simple deletion of the end switch-off points
Special features:
For electronic BECKER motors.
2.8 m long drive cable connector.
2 meter power cord.
Makes it easier to learn the end positions precisely.
With practical plug connection.
MADE IN GERMANY