€159.90*
Available, delivery time: 1-3 days
Product information "Simu radio roller shutter motor T5 EBHz 8Nm - 50 Nm"
SIMU BHZ radio motor
Motor with integrated SIMU-BHz radio receiver and electronic limit switch system
Control your roller shutters in real time via Smartphone with Livein2
The motor reports its position to your smartphone.
ELECTRONIC LIMIT SWITCHES
There are four possible setting types for the limit switches:
fully automatic, semi-automatic up or down and manual.
OBSTACLE DETECTION
If the roller shutter hits an obstacle in the downward direction, the motor registers this thanks to the fixed shaft connector and stops.
FROSTER DETECTION
The motor switches off automatically if the roller shutter curtain gets stuck in the guide rails due to an up or down command due to frost,
This prevents damage to the roller shutter.
INTERMEDIATE POSITION
The user can save any intermediate position.
SIMPLE PROGRAMMING
The installation and programming steps are identical to the SIMU-Hz technology.
| Zugkraft (Nm): | 20 |
|---|---|
| Umdrehungen/min (Upm): | 17 |
| Nennpannung (V): | 230 |
| Motorfunktionen: | Festfrierschutz, Hinderniserkennung, Plug & Play Motor, Zwischenposition |
| Motortyp: | Funk Elektronisch |
| Steuerungsart: | Funkgebunden |
| Wellendurchmesser: | 60mm Achtkantwelle (SW60) |
| Zugkraft (kg): | 34 |
|
Degree of protection |
IP 44 |
|
Supply voltage |
230 volts - 50 Hz |
|
Switch-off time temperature limit |
4 minutes |
|
End position |
Electronic end position system with 3 minutes running time |
|
End position readjustment |
Every 56 cycles for 4 cycles (in automatic mode) |
|
Power cord |
2.5 meters (3 cores of 0.75 mm², white, H05 VVF), pluggable |
|
Radio range of the radio hand transmitter |
Wall transmitter: 150 m in an open field and 15 m through two concrete walls |
|
radio frequency |
Triband radio frequency 868-870 Hz with 8-fold repetition rate |
|
4 cycles per day |
Not consecutive |
|
Protection class |
I |
|
Declaration of conformity |
European standards (EN) + IEC standards (international standards) |
|
Basic adapter |
For round shaft diameter 50 x 1.5m |
|
Width of the drive head |
22.8 mm |
|
Article number |
8 Nm - 2009425 |
|
Performance |
8 Nm - 100W |
|
Current consumption |
8 Nm - 0.45 A |
|
Length |
8 Nm - 621 mm |
Login

